UGTV
Results 1 to 5 of 5

Thread: BM2 cast times and retarget info

  1. #1


    Posts
    925

    Character Class
      Blader

    Status: Offline

    Default BM2 cast times and retarget info

    Hello all, I took some time to finally test out bm2s and hopefully end some debates over what might be better for retarget etc. I slowed down videos of all classes in bm2 and paused the moment damage was displayed, recorded all the numbers and the times between them [will clarify reasons for this if needed]. Do note that by human error these can be +/- .1 seconds. These are the figures I came up with:

    Normal Cycle Timings:

    [WA]

    1st attack: .8 seconds

    2nd attack: .8 seconds

    3rd Attack: .9 seconds

    4th Attack: 2.267 seconds

    Total: 4.767 seconds

    [BL]

    1st attack [divided into two claw hits]: .3 seconds

    2nd attack [divided into two claw hits]: .8333 seconds

    3rd attack [divided into two claw hits]: .7333 seconds

    4th attack: .4 seconds

    Total: 2.267 seconds

    [FB]

    1st attack [divided into four stabs]: 1.133 seconds

    2nd attack: .7333 seconds

    3rd attack: 1.067 seconds

    4th attack: 1.333 seconds

    Total: 4.267 seconds

    [FA]

    1st [divided into four gun shots]: .7333 seconds

    Total: .7333 seconds

    [FS]

    1st attack: 1.067 seconds

    2nd attack:1.7 seconds

    3rd attack [divided into three shield hits]: 2.233 seconds

    Total: 5 seconds

    For Retarget use these on these attacks:
    Do note that hits you do not retarget on will remain the normal cast time. Ex: If you retarget after 3rd hit on WA the 1st and 2nd will be their normal times [shown above] and not the values listed below.

    [WA]

    1 hit - Same as normal cast time
    2 hit - .9 seconds from regular .8 seconds
    3 hit - .833 seconds from regular .9 seconds

    [BL]
    After 2nd attack [the 4th claw hit, can't do two yet :P] - .6 seconds from original .833 seconds

    [FB]
    After 1st attack [the 4 stabs] - .8333 seconds from original 1.1333 seconds
    After 2nd attack - .5 seconds from original .7333 seconds
    After 3rd attack - .67 seconds from original 1.067 seconds

    [FS]
    1 hit- Same as normal cast time
    2 hit- 1.1333 seconds from original 1.7 seconds
    The Cabal Damage Calculator v1.5 by LastHour:

    http://forum.cabalonline.com/showthread.php?t=137555

  2. #2

    DAIMONOSpika's Avatar
    Location
    Here
    Posts
    605

    Character Name
     Zevir
    Character Level
      180
    Character Class
      Blader

    Status: Offline

    Default

    WUT? this is not a bm2 info thread?
    i'm Back

  3. #3


    Posts
    4

    Character Class
      Blader

    Status: Offline

    Default

    how to re target???

  4. #4

    Junco's Avatar
    Location
    Netherlands
    Posts
    1,987

    Character Name
     Hellsystem
    Character Level
      166
    Character Class
      Wizard

    Status: Offline

    Default

    Esc when attacking then click on mob and do attack agian
    If you do it good you can be allot FASTER then normal bm2 if you let the char finish attacks


    Hellsystem wiz 165
    Errorcode06 4 life

  5. #5


    Posts
    42

    Character Name
     DracoDevil
    Character Level
      100+
    Character Class
      Force Shielder

    Status: Offline

    Default

    any1 can make video of BM2 retargeting? If it's with FS BM2 it'll be awesome :P

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •